Mobile Ceramic Coating Installation Available to ALL of Wisconsin!
The Same Professional Products. The Same Superior Results. The only difference? Your address instead of ours.
Protecting Your New Vehicle is Now More Important Than Ever!
With the all time high cost for New Vehicles, Ceramic Coating has gone from a luxury for the rich; to essential for everyone. Ceramic coating is a liquid polymer that chemically bonds with a vehicle’s paint, creating a durable, hydrophobic layer of protection. If you are looking for an easy to maintain protection for your vehicle; keep reading below!
The 3 BIGGEST Pain Points that Ceramic Coating Combats:
Loss of Gloss
Pain: New paint turns gray and flat fast—wash film, micro-marring, and UV haze kill the “wet” look. Not to mention even the most delicate wash leads to marring.
With Ceramic: After a light polish, the coating locks in gloss, blocks film/UV, and reduces new marring so it actually stays shiny longer.
Winter Salt & Brine
Pain: Heavily chalked lower panels, white creep around badges, clear coat that’s chemically burned / etched by February.
With Ceramic: A chemical shield that resists salt/strong soaps so grime releases with a quick wash instead of grinding into the paint.
Bird Bombs & Bugs Guts
Pain: Overnight craters and ghost rings you can’t unsee, nor get out of your clear coat because it’s permanently etched.
With Ceramic: Acid resistance + time buffer—the mess lifts with a gentle wash/mild remover instead of abrasion (machine polishing).
What the Installation Process Looks Like
First and foremost, installing ceramic coating is an incredibly clean process. Other than the wash itself (leaving some soap and water) – we are in and out with no effect to your property. Basically a shiny car or truck is the only way you will know we were there. Below is a sample of a Mobile Installation of our 5 Year Ceramic Coating. You can click each header then scroll slightly down to read more about each step of our process.
Full Exterior Detail
(Click and Read More Below)
Buffer Applied Polish
(Click and Read More Below)
Panel Preparation
(Click and Read More Below)
Application of Coating
(Click and Read More Below)
It All Starts with a Meticulous Detail!
A wash, as part of the exterior detail, involves thoroughly cleaning the vehicle’s surface to remove dirt, dust, and contaminants. It typically starts with rinsing the car to loosen debris, followed by using a pH-neutral soap and soft mitts to hand wash the entire exterior. The process ensures all visible areas, including the wheels, tires, and hard-to-reach spots, are cleaned, leaving the surface ready for further treatment; like a ceramic coating.
Chemical decontamination uses cleaners to remove embedded contaminants from the vehicle’s surface.
Clay bar / clay mitt treatment removes surface contaminants and smooths the vehicle’s finish.
Buffer Applied Polish to All Painted SUrfaces
Buffer-applied polish enhances the vehicle’s surface by removing minor imperfections and refining the finish. This process prepares the paint for a coating by creating a smooth, glossy surface that ensures better adhesion and durability of the coating. (Have deeper scratching or swirl marks? Read More About Paint Correction)
Plastics and Chrome are Always Taped Off to Ensure They are Protected
Polish Adds a Deep Shine and Helps Fill the Paint’s Pores to Ensure a Clean Bond for Nano Coatings
Grease and Oil Be GONE After Panel Prep!
Panel prep for paint protection coatings involves using a specialized solvent or cleaner to wipe down the vehicle’s surface, removing any remaining oils, polish residue, or contaminants. This step ensures a completely clean surface, allowing the ceramic coating to bond effectively for maximum protection and durability.
Panel prep eliminates microscopic residues that can hinder the coating’s adhesion, ensuring an even and flawless application.
It enhances the coating’s durability by creating a perfectly clean, bond-ready surface for optimal chemical interaction.
Application of 5 Year Coating + Final Inspection!
Coating application on paint begins with carefully applying a liquid polymer to the vehicle’s surface using an applicator pad. The coating bonds with the paint at a molecular level, creating a durable, protective layer that enhances gloss and provides long-lasting resistance to environmental elements like UV rays and chemicals. After applying, the coating cures, forming a strong, hydrophobic shield that repels water and contaminants, keeping the paint cleaner for longer.
Years of High Gloss; Easy to Clean Protection for Your Paint!
The Chemical Resistance Helps with Bug Etching, Bird Droppings and the Salt of Wisconsin Winters
Paint Protection Coating Gallery
Coatings by the Bay has installed paint protection on over 1000 vehicles across Wisconsin. Here is just a small sampling. We cannot wait to add yours to the collection!
What About Pricing?
Below will be a button to take you to our Ceramic Coating Pricing Calculator. It will show you exact cost of installation – with no personal information required. If you like the price simply request your official quote to get the process started! Hope to work with you soon.
Every Company Claims to be “The Number 1” or “The Best” – Coatings by the Bay can actually back it up…
The Map pictured is ORGANIC (not paid) results when you search on Google for “Ceramic Coating” from the location of the pin. Average ranking of 1.06 across 500 sq miles. Google takes hundreds of factors into consideration when prioritizing one company over another. These results are NOT typical. Typically as you move away from where one shop is centered and towards another, rankings will drop.
Book your protection with the best in the NE WI!
Frequently Asked Questions About Ceramic Coating
How Much Does Ceramic Coating Installation Cost?
Our 5 year ceramic coating package starts at $875 and ranges up to $1095 depending on vehicle size. For Mobile installation we charge a small flat fee of $95 for up to 150 miles of travel from 54914. This radius covers Milwaukee, Madison, Stevens Point, Green Bay, Sheyboygan and More!
How Long Does Installation Take?
We typically arrive just before 8 and the process will be completed in a single day. If base package only; by lunch we have completed installation. The vehicle will need to cure for 24 hours before driving / getting wet.
Are You Going to Make a Mess During Installation?
The better than showroom new car will be the only way you know we were there!
Overall this is an incredibly clean process. Once the vehicle is washed (typically outside), you won’t see any other “mess” from us. We would even bet the soap and water from the wash is gone before we leave.
Is it the Same Products / Process As You Use In-Shop?
Absolutely. The entire process (including products) is exactly the same as we utilize in our shop. You will be blown away by the results, we guarantee it.
Do You Need a Garage or Can You Install Outside?
We do require a garage / indoor space with close access to basic water and power hook ups. The space must be able to maintain at least 55 degrees for 24 hours for the cure period. It does not have to spotless, some normal garage clutter is just fine. Outdoor installations are not reccomended with Ceramic Coating.