Coatings by the Bay Exclusively Installs Ceramic Coating for New Vehicles in Wisconsin!
About to Buy (or Just Bought) a New Vehicle? Coatings by the Bay Offers Professional Grade Paint Protection Starting at Just $875! You can drop it at our place; or we can come to yours – ANYWHERE in Wisconsin. We Look forward to talking soon!
The Owner of Coatings by the Bay [George] has been Certified with Many of the Top Brands over his near decade of experience. These include, but are not limited too Ceramic Pro, System X and Undrdog. We offer a 200% money back guarantee to remove any doubt that you will have the best experience possible!
#1 Rated in NE WI
This isn’t just a fluffy claim – Coatings by the Bay is the top rated Ceramic Studio in NE WI.
Learn More About Top Rated Studio Claim Here!
Exclusive to Paint Protection
By offering a single service (Ceramic Coatings) we have perfected the installation process.
See Our Meticulous Installation Process Here!
Book Instantly Online
With a straightforward booking form available you can see pricing and book in 2 minutes.
See Pricing and Book Instantly Here
Our Studio or Your Garage – You Choose!
Coatings by the Bay has protected over 1000 New Cars / Luxury Vehicles with the highest quality paint protection on the market. Coatings by the Bay also offers the best of both worlds; with in-studio or mobile appointments that start at just $875!
If looking to drop off your new vehicle, our Ceramic Studio is in Grand Chute, WI; just 4 minutes from Victory Lane. If looking for a mobile ceramic coating service – all we need is a climate controlled garage and we can install your paint protection coating after you’ve had a few days to play!
Every Company Claims to be “The Number 1” or “The Best” – Coatings by the Bay can actually back it up…
The Map pictured is ORGANIC (not paid) results when you search on Google for “Ceramic Coating” from the location of the pin. Average ranking of 1.06 across 500 sq miles. Google takes hundreds of factors into consideration when prioritizing one company over another. These results are NOT typical. Typically as you move away from where one shop is centered and towards another, rankings will drop. Book your protection with the best in the NE WI – Also offering mobile for YOUR convenience.
What the Installation Process Looks Like
This is a sample of a mobile installation we performed down in Whitefish Bay, WI. The process is the same whether you book in-studio or book for us to come to your home. You can click each header tab and then read a bit more about the service. Hope to work with you soon!
Full Exterior Detail
(Click and Read More Below)
Buffer Applied Polish
(Click and Read More Below)
Panel Preparation
(Click and Read More Below)
Application of Coating
(Click and Read More Below)
It All Starts with a Meticulous Detail!
A wash, as part of the exterior detail, involves thoroughly cleaning the vehicle’s surface to remove dirt, dust, and contaminants. It typically starts with rinsing the car to loosen debris, followed by using a pH-neutral soap and soft mitts to hand wash the entire exterior. The process ensures all visible areas, including the wheels, tires, and hard-to-reach spots, are cleaned, leaving the surface ready for further treatment; like a ceramic coating.
Chemical decontamination uses cleaners to remove embedded contaminants from the vehicle’s surface.
Clay bar / clay mitt treatment removes surface contaminants and smooths the vehicle’s finish.
Buffer Applied Polish to All Painted SUrfaces
Buffer-applied polish enhances the vehicle’s surface by removing minor imperfections and refining the finish. This process prepares the paint for a coating by creating a smooth, glossy surface that ensures better adhesion and durability of the coating. (Have deeper scratching or swirl marks? Read More About Paint Correction)
Plastics and Chrome are Always Taped Off to Ensure They are Protected
Polish Adds a Deep Shine and Helps Fill the Paint’s Pores to Ensure a Clean Bond for Nano Coatings
Grease and Oil Be GONE After Panel Prep!
Panel prep for paint protection coatings involves using a specialized solvent or cleaner to wipe down the vehicle’s surface, removing any remaining oils, polish residue, or contaminants. This step ensures a completely clean surface, allowing the ceramic coating to bond effectively for maximum protection and durability.
Panel prep eliminates microscopic residues that can hinder the coating’s adhesion, ensuring an even and flawless application.
It enhances the coating’s durability by creating a perfectly clean, bond-ready surface for optimal chemical interaction.
Application of 5 Year Coating + Final Inspection!
Coating application on paint begins with carefully applying a liquid polymer to the vehicle’s surface using an applicator pad. The coating bonds with the paint at a molecular level, creating a durable, protective layer that enhances gloss and provides long-lasting resistance to environmental elements like UV rays and chemicals. After applying, the coating cures, forming a strong, hydrophobic shield that repels water and contaminants, keeping the paint cleaner for longer.
Years of High Gloss; Easy to Clean Protection for Your Paint!
The Chemical Resistance Helps with Bug Etching, Bird Droppings and the Salt of Wisconsin Winters
Our Paint Protection Coating Gallery
Coatings by the Bay has installed paint protection on over 1000 vehicles. Here is just a small sampling. We cannot wait to add yours to the collection!